Pump > article > A Centrifugal Pump And Its General Components

Products Categories


Contact Us

  • A&S Pump Co.,Ltd
  • Address: 469 Xinsheng Road, Gaoxin District, Chengdu, Sichuan 610041, China
  • Tel: +86-28-65376553
  • Fax: +86-28-86129221
  • Email: pump@attachment8.com
  • Full Name: Aly Yu
  • Like Us:

A Centrifugal Pump And Its General Components

A pump is a device which plays a very important role in this society. And the centrifugal pump is one of the simplest pieces of equipment in any process plant. Its purpose is to convert energy of a prime mover first into velocity or kinetic energy and then into pressure energy of a fluid that is being pumped. The energy changes occur by virtue of two main parts of the pump, the impeller and the volute or diffuser. The impeller is the rotating part that converts driver energy into the kinetic energy. The volute or diffuser is the stationary part that converts the kinetic energy into pressure energy. But do you konw what a centrifugal pump is made up of?

There are two main components of a centrifugal pump: rotating component and stationary component. The former consists of an impeller and a shaft, while the latter is composed of a casing, casing cover, and bearings.

Firstly, let's see something about the rotating component. The impeller is the main rotating part that provides the centrifugal acceleration to fluid. It is also classified in many ways. For example, it can be classified according to mechanical construction. There is closed type, open type, semi-open or vortex type if classify according to this. The first type of impellers require wear rings and these wear rings present another maintenance problem. And the open and semi-open impellers are less likely to clog, but they may need manual adjustment to the volute or back-plate to get the proper impeller setting and prevent internal re-circulation.

And another important part of rotating component is the shaft. The basic purpose of it is to transmit the torques encountered when starting and during operation while supporting the impeller and other rotating parts. It must do this job with a deflection less than the minimum clearance between the rotating and stationary parts.

Now, let us get down to some parts of the stationary component. Generally, there are two types of casings which are volute and circular. Volute casings build a higher head, and one of its purposes is to help balance the hydraulic pressure on the shaft of the pump. Circular casings are used for low head and high capacity. Except for them, bearings are also very useful components in the centrifugal pumps.

All these various components are of great importance. They cooperate well with each other to achieve good performance of centrifugal pumps.


about www.pumpstrading.com
Address: 469 Xinsheng Road, Gaoxin District, Chengdu, Sichuan 610041, China
Phone: +86-28-65376553
Fax: +86-28-86129221
Email: pump@attachment8.com
Full Name: Aly Yu

Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
*  Email:
*  Inquiry / Comments
*  Code